SIDHE Absolute BR Trigger (REM 700)
Code: SIDHE-ABRProduct detailed description
Product description
A pull weight from 10 g. That's less than most of the cartridges you'll fire from that rifle weigh. Absolute BR is the most sensitive trigger SIDHE makes.
- ✓ 10–25 g pull, 15–50 g with the second spring – one trigger covers both an extremely light benchrest pull and a slightly more secure F-Class setting.
- ✓ Minimal effect on the firing pin spring – the first lever releases very easily under load, and the firing pin keeps its full energy for reliable ignition.
- ✓ Four EZO ball bearings – friction-free movement and a pull weight that doesn't change even after years of intensive training.
- ✓ Enclosed housing with no side openings – dirt stays out and nothing upsets the extremely fine adjustment.
- ✓ Second spring included – you match the pull weight range to your discipline without buying extra parts.
- ✓ Hardened top sear with DLC coating – 1.2083 tool steel hardened to 55 HRC with a hard, slick surface keeps the engagement surfaces crisp, so the character of the break doesn't change as the round count grows.
- ✓ Trigger blade your way – Gold, curved as standard, black or titanium grey, straight on request at no extra charge.
At a pull weight of around 10 g, every detail matters: friction, dirt, microscopic play. Absolute BR is built so that none of them gets a chance. Ball bearings instead of sliding surfaces, a hardened DLC-coated top sear and an enclosed housing add up to a trigger that breaks exactly where you set it. Firing pin energy is preserved as well, so sensitivity doesn't come at the expense of reliable ignition.
Technology
The trigger housing is machined from high-strength ERGAL 7075 aluminium alloy and anodized. The top sear, which holds the firing pin directly, is made of 1.2083 stainless tool steel hardened to 55 HRC with a black DLC coating. The hard, low-friction surface minimizes wear on the sear engagement surfaces, so the character of the break stays the same as the round count climbs. Friction between the levers is replaced by four EZO stainless steel ball bearings made in Japan. The movement is smooth and the pull weight stays the same from the first shot to the last – even after years of use.
Design
The housing is fully enclosed, with no side openings. The top sear is exposed only where it engages the firing pin, so dust, sand and old lubricant can't reach the sear engagement surfaces. The design keeps the force needed to release the first lever as low as possible, taking as little as possible away from the firing pin spring. The adjustment screws are secured with thread locker – vibration and recoil won't shift your settings.
In practice
The trigger fits in place of the factory trigger in a Remington 700 action or a compatible action. It is single-stage with no safety and, with a pull weight this light, belongs strictly on the competition range. Use the second spring included in the box when you want to move the pull weight into the 15–50 g range.
Who it's for
Top-level competition: benchrest and F-Class for shooters who want the most sensitive trigger SIDHE makes.
Professional shooter's opinion
We'll come clean: Michal hasn't found the time to comment on this one yet. He's completely swamped. He's always happy to answer questions, though, so drop him a line at michal.vavrecka@neopatron.cz.
Technical specifications
- Product code: SIDHE-ABR
- Product name: SIDHE Absolute BR Trigger (REM 700)
- Manufacturer: SIDHE s.r.l. (Italy)
- Interface: Remington 700
- Type: single-stage
- Safety: none
- Pull weight: approx. 10–25 g (15–50 g with the second spring included)
- Adjustments: sear engagement, pull weight
- Bearings: 4× EZO stainless steel ball bearing (Japan)
- Sear train levers: 4
- Housing material: ERGAL 7075, anodized
- Top sear: 1.2083 steel, hardened to 55 HRC, DLC coating
- Trigger blade – standard: gold, curved
- Trigger blade – optional (no charge): black or titanium grey, straight
- Trigger blade – optional (extra charge): chamfered for right- or left-handed shooters, various colours
- Weight: 24 g
- Intended use: benchrest, F-Class
- Package contents: plastic case, Allen key, second spring
- Country of origin: Italy
Additional parameters
| Category: | Firearm parts |
|---|---|
| Warranty: | 5 years |
| ? Weapon platform: | REMINGTON 700 |
| ? Container: | YES |
| ? Adjustability: | YES |
| ? Trigger bow: | More options |
AlwaysSecond comment: I have already sold and tried a really large number of triggers. And with precision rifles one thing holds true: you can have a barrel worth a fortune, a scope costing as much as a used car and a stock straight out of NASA, but if the trigger is bad, it is all for nothing. Every shot that does not even have to be a "flyer", but just drifts off, keeps nagging at you, and you start blaming the rifle, and the scope, and the mount, and the wind, and breaking wind ;) and anything else ... just not yourself and your trigger control. In the dynamic disciplines I am absolutely clear: a Geissele Automatics trigger. Which one ... that is not important right now. What is important is that if I were buying a trigger for a bolt-action target rifle, I would think very carefully about which trigger to get. And SIDHE would be one of the first on the list. Anyone who has ever seen a SIDHE from the inside knows what I am talking about. Ball bearings instead of pins, a watch movement, a sealed body… it is a piece of well-done work. And the break? Not the slightest creep, no wall stand, no false let-offs, just an absolutely clean break, and that from approx. 10 g of pull weight (depending on the model). It is no coincidence that more and more top shooters at benchrest and F-Class competitions around the world are reaching for them. And do you know what amused me the most? The shooter who finished second at the 2024 European F-TR Championship has, according to the manufacturer, fired over 11,000 rounds through a SIDHE since 2017 without a single failure. Second! Finally a trigger made right for my category :-) I recommend them to everyone who is serious about precision shooting.
And if anyone tries to tell you that "nobody in the world shoots with these", it will only show their lack of knowledge in the field. Quite the opposite. Lately, more and more SIDHE triggers are being exported around the world. Although Bix'n Andy is an excellent trigger, it is not the only one in the world that is TopClass ;)
Michal "AlwaysSecond" Vavrečka
Czech national team shooter
14-time Czech Vice-Champion and "curiositist"
„AlwaysSecond – Your first choice“
SIDHE Italy – Italian precision? No ... more like a Swiss watch on ball bearings ... that just happens to come from Italy
What makes SIDHE different from its competitors – and why are the best shooters reaching for it?
SIDHE is an Italian company that approaches the trigger as a precision-engineered component, not as just another mass-produced part. A conventional trigger relies on pins and sliding surfaces that rub against each other. And friction is the greatest enemy of consistency: it changes with temperature, dirt, lubricant and wear. That is why SIDHE has mounted the key levers of the mechanism on high-precision stainless steel ball bearings from the Japanese brand EZO. The result is virtually zero friction, the same pull weight shot after shot, and a trigger that requires no lubrication. Every unit is assembled in Italy; the only bought-in parts are the bearings from Japan.
In addition, the EVO line has a fully enclosed, sealed body. It was developed at the request of shooters from Australia and South Africa, where sand and dust can put even the best mechanism out of action. At the 2024 European F-Class Championship in Bisley, UK, around 50 competitors shot with SIDHE BR EVO and Target EVO triggers in rain and mud, and still without any problems.
Who are SIDHE triggers made for?: For benchrest and F-Class shooters, long-range shooters, tactical precision shooting, CZ 457 sporting rimfire rifles, and also for demanding hunters with a Tikka or a Remington 700. Simply for everyone who knows that the difference between a good shot and a great one often begins under the index finger.
Why choose SIDHE triggers:
- Ball bearings instead of pins – depending on the model, 1 to 5 precision EZO stainless steel bearings, minimal friction, consistent pull weight, no lubrication required
- Aerospace materials – body made of anodized ERGAL 7075 aluminium, top sear made of 1.2083 steel hardened to 55 HRC with DLC or TiN coating, stainless steel components
- Sealed body of the EVO line – resists dust, sand, rain and mud, proven in competition conditions
- Wide range of adjustments – pull weight, sear engagement, travel and overtravel, trigger shoe position (up to ±6 mm on selected models), straight or curved trigger shoe
- Extremely light and clean break – the CZ 457 Competition from as little as approx. 15–20 g (depending on the model), hunting and tactical versions with a reliable safety in the hundreds of grams
- Models for the most widespread platforms – Remington 700 and clones (including Rem700 footprint clones), Tikka T3/T3x/T1x, CZ 457
- Made in Italy – development and assembly in Italy, no anonymous mass production
The model range in a nutshell:
- BR EVO / Competition BR – benchrest and F-Class, Remington 700 and clones, no safety, pull weight of just 20 g+
- Target EVO – target and F-Class shooting, versions with and without safety
- Tactical / Target Match – single-stage trigger for tactical and long-range rifles, also popular with experienced hunters
- Hunter – hunting trigger with safety and bolt release for Remington 700 and clones
- TK Performance – for Tikka T3, T3x and T1x
- CZ 457 Competition / Performance – for CZ 457 sporting rimfire rifles, competition version with a pull weight of around 20 g+
Why buy them from neoPATRON:
✔ Above-standard services – we can source even non-standard products outside our regular offer✔ Stock availability – we try to keep them in stock, so you do not have to lower your standards and settle for the competition
✔ Best prices – we try to keep them best both for end customers and for retailers
✔ Friendly and reliable service – it will never happen that we do not answer your e-mail or phone call