Bipod Harris - allows mounting of stud on hollow plastic fore-ends
Code: NO 2R
Product detailed description
Key Benefits
- Radiused flange – the curved profile seats more naturally in a matching rounded fore-end than a flat flange
- Defined 3/4-inch radius – allows fit to be evaluated before installation
- Designed for under-gas-tube applications – addresses fore-ends with limited internal space and a curved bearing surface
- Suitable for wood or polymer – compatibility depends on internal geometry, not material alone
- Made in the USA – a genuine Harris Engineering adapter
Adapter Purpose
The Harris No. 2R Adapter is a genuine mounting adapter designed for wood or polymer fore-ends with a curved internal profile beneath a gas tube. It creates the correct mechanical interface for a Harris bipod where the stock or rail does not already provide a suitable sling swivel stud.
Compatibility and Limitations
Designed for wood or polymer fore-ends whose internal profile matches the 3/4-inch-radius flange and provides adequate clearance beneath the gas tube. It is not interchangeable with the flat No. 2 or round-head No. 2A adapter.
Technical Specifications
- Model: No. 2R Adapter
- Flange type: radiused
- Flange radius: 3/4 in
- Stock material: wood or polymer with matching geometry
- Made in: USA
Installation
The flange must follow the internal fore-end profile and must not interfere with the gas tube or any other moving or heat-exposed component. Always unload the firearm and open the action before installation. If the stock construction or rail size is uncertain, verify compatibility before drilling or tightening the adapter.
Practical Note from neoPATRON
Exact geometry matters more than a generic stock or rail label. The correct adapter keeps the bipod aligned and distributes load through the surface for which the part was designed.
Additional parameters
| Category: | Harris Engineering USA |
|---|---|
| Warranty: | 5 years |
AlwaysSecond komentář: "Harris bipod" are known since ever. There are slowly being pushed out the market by "cheap China copies" in recent years, but when two are doing the same, it is NEVER the same. We also had been selling copies, from Caldwell and others, all made in China. But by this products is really true: "What you pay, is what you get!" If you pay low-cost, it will look the same, but low-cost you will get. And there is no "higher happiness" than to buy copies to reasonable rifle with nice optics, when the pod goes off, your rifle goes down and falls with optics directly to a concrete, from which you are shooting. Then you can call yourself "I am such a fu...er". I will deny it, but I am talking from my own experience :( I also understand that if you have to rimfires for your kids to play, that you will set them with original Harris bipods. But if you have reasonable rifle, it is in your interest to equipp it with something reliable. And Harris Bipods are reliable since 1979, and they do work. Today there are "one bipods better than the second, and second better than the third" ... so how it comes, that there is still so high demand for original Harris? They are simple, reliable, price-reasonable, made accordingly to MIL specs ... and THEY DO WORK!
Michal "AlwaysSecond" Vavrečka
Czech shooting representant
14th times Vicechampion of Czech and "curiositic"
„AlwaysSecond – Your first choice“
Harris Engineering USA - bipods that are functioning since 1979 and still the same well ...
Who would not know Harris Bipods? Unfortunately nowadays you see the market flooded by China copies only. But why? Because it is so simply engineered, that there is nothing to make better. And that is since 1979. And because it just works and is price-reasonable, it was heavily used by US Army and then liked by many other armies and special units all across the world, but also by civilian shooters. Those are very demanding, so they started the era of "much better bipods", but Harris Bipods are still the ethalon of quality and Mil-Spec product.
Why to choose Harris Engineering bipods:
- Stability - there are stronger specialized bipods, but Harris still deliver you very reasonable rigidity and functionality
- Endurance - based on military specifications that they have to work through every weather conditions and storms
- Speed - try to open with same speed some other bipods, secured each pod with unlocking ;)
- Low weight and compct size - there are even lighter copies (made from "paper and pigeon shit"), but Harris bipod is still light but robust
- Seamless construction - that is why there are so many copies. Construction-wise there is nothing to object or make better
- Intuitive operation - you just lean it and fix it (I hope we do not have to even mention the height setup, easy-peasy...
- Various mounting possibilities - there are numerous adapters, allowing you to mount them to "anything"
- Easy maintenance - which you will not even do, we know you. But they will still work...
- Made in USA - in contrary to "real american brands bought in China" and rebranded
- Intended for professionals - so you can really rely on
Why to buy them in neoPATRON :
✔ Direct distribution - we are distributor supported directly by the producer in USA✔ Above-standard services - we can provide you with non-standard products outside of the regular offer
✔ Quickiest service - in case of damage, claim, ... we can serve you the quickest
✔ Best pricing - we try to keep as for the end-users, so for the retailers
✔ Kind and reliable service - it will not happen to us that would not reply your email of phone